RAVENOL ATF DSIH 6
RAVENOL ATF DSIH 6 is fully synthetic special ATF Fluid, based on Polyalphaolefine (PAO) with special additives and inhibition.
RAVENOL ATF DSIH 6 is special ATF Fluid for 6-stroke automatic transmission of Drivetrain Systems International Holdings (DSIH) for SsangYong KYRON, ACTYON, ACTYON SPORTS, Geely GC7, GX7, SC7 and EC8. Ensures the proper operation of the automatic transmission.
RAVENOL ATF DSIH 6 is with red colour.
RAVENOL ATF DSIH 6 is recommended for all automatic transmissions of the following vehicles:
6-stroke automatic transmission of Drivetrain Systems International Holdings (DSIH) for SsangYong KYRON, ACTYON, ACTYON SPORTS, Geely GC7, GX7, SC7 and EC8.
Maintenance-free filling under normal operating conditions.
Practice and tested in aggregates with filling
SsangYong 0578-244021, Caltex 1712, ATF 3292, DSI M11 6-Speed Korando, DSI M78 6-Speed Kyron, Actyon
RAVENOL ATF DSIH 6 offers:
- Excellent fluidity at low temperatures
- High, stable viscosity index
- Excellent oxidation stability
- Extensive protection against wear, corrosion and foaming
- An excellent friction characteristics
- A high thermal and oxidative stability
- An excellent cooling performance
- Improved shear stability
RAVENOL special fluid is special development for special units and cannot be selected on the basis of technical parameters (viscosity, etc.). Therefore the decision was made not to give technical data.
Please note: RAVENOL special fluid is exclusively to apply under the original number, as indicated in the product information. Not sure of the correct fluid, you can ask your garage or the car dealer with respect to the original OEM type and number or consult our advisers. It must be specified the VIN code (Vehicle Identification Number) of your vehicle.
Misapplication of RAVENOL special fluid can lead to malfunction of the unit and cause failure.
Ravensberger Schmierstoffvertrieb GmbH does not liable for failures in case of wrong selection of RAVENOL special fluid.
Article number: 1211133
|Density at 20°C||kg/m³||845||EN ISO 12185|
|Pourpoint||°C||-54||DIN ISO 3016|
All indicated data are approximate values and are subject to the commercial fluctuations.