RAVENOL TTC Trad. Techn. Coolant Concentrate
NITRITE- AMINE- PHOSPHATE- FREE
RAVENOL TTC Traditional Technology Coolant Concentrate is an eco-friendly 1.2- Ethanediol (monoethylene glycol) based nitrite, amine and phosphate-free coolant for cooling circuits in combustion engines which provides maintenance-free corrosion and frost protection. The product is formulated as a long-term coolant based on a proven inhibitor development.
It is no longer just the anti-freeze effect (which automatically exists in an ethylene-glycol based product) which is critical for the quality of a coolant, but also the rust protection.
Therefore automakers subject coolants to long corrosion and cavitation tests.
RAVENOL TTC Traditional Technology Coolant Concentrate protects the cooling system from corrosion, frost, and in the summer from overheating.
RAVENOL TTC Traditional Technology Coolant Concentrate with frost and rust protection. Use according to the mixing chart. Follow manufacturer’s recommendations.
Even in summer coolant must contain enough antifreeze to ensure good corrosion and overheating protection.
Instructions: Clean cooling system, check for leaks, flush.
Mix RAVENOL TTC Traditional Technology Coolant Concentrate with fresh water (per mixing chart) and add. Allow engine and heater to warm up, add coolant to fill level.
Antifreeze protection to approx. Parts antifreeze Parts water
- 12°C 25 % 75 %
- 20°C 35 % 65 %
- 37°C 50 % 50 %
RAVENOL TTC Traditional Technology Coolant Concentrate is tried and tested for aggregates specifying:
VW TL 774-C (acc. to G11 quality), BS 6580 (GB), O Norm V 5123 (Österreich), JIS K 2234 (Japan), CUNA NC 956-16 (Italien), AFNOR R15-601 (Frankreich), SAE J1034, UNE 25-361 (Spanien), ASTM D 4985, ASTM D 1384, ASTM D 2570, ASTM D 2809, FORD WSS-M97B51-A, FIAT 9.55523, FIAT PARAFLU 11, IVECO 18-1830, ASTM D 3306 Type 1, ASTM D 6210 Type 1-FF, CHRYSLER MS 7170
RAVENOL TTC Traditional Technology Coolant Concentrate offers:
- Excellent for light metal engines
- Good reserve alkalinity
- High-quality corrosion additives for optimal corrosion protection
- Elastomer compatible with elastomers used in automotive radiators
Article number: 1410100
|Density at 20°C||kg/m³||1130||EN ISO 12185|
|Flash point (COC)||°C||141||DIN 51 758|
|Boiling point||°C||155||ASTM D 1120|
|pH-value (50 %, 20°C)||7,8||ASTM D 1287|
|Reserve alkalinity||ml 0,1 n HCL||20||ASTM D 1121|
|Water content||Gew.-%||5||ASTM D 1123|
|Freezing point (50 %-Lösung)||°C||-37||ASTM D 1177|
All indicated data are approximate values and are subject to the commercial fluctuations.